|
|
Post by jhito on Oct 11, 2008 17:33:01 GMT 8
 Just for your guide lang mga bossing |
|
|
|
Post by G.I._joe on Oct 11, 2008 18:33:33 GMT 8
nice chart bossing..
|
|
|
|
Post by kirk07 on Oct 11, 2008 18:39:23 GMT 8
nindot ni dah... unsay pasabot reinforced gearbox? metal shims?
|
|
|
|
Post by G.I._joe on Oct 11, 2008 19:10:57 GMT 8
nindot ni dah... unsay pasabot reinforced gearbox? metal shims? mas baga ang construction sa contact points sa gearbox compared sa stock nga gearbox usually sa c.a. or deepfire ang nay reinforced gb. |
|
|
|
Post by kirk07 on Oct 11, 2008 19:24:40 GMT 8
xalamat master joe... inpormatib nasad.
|
|
|
|
Post by G.I._joe on Oct 11, 2008 20:47:40 GMT 8
hehe.. dili sad woi..  |
|
|
|
Post by jhito on Oct 11, 2008 20:58:07 GMT 8
explained properly boss joe dah
|
|
|
|
Post by G.I._joe on Oct 11, 2008 21:02:41 GMT 8
WAAAAAAAAHH!
|
|
|
|
Post by katol on Oct 12, 2008 6:47:53 GMT 8
here you go... glossary of terms for basig upgrade... il repost some more...
Gears -- The gears are a very important and expensive part of the rifle. Don't be tempted to buy cheap gears, as you will probably end up paying a lot more to fix the gearbox when they break. If you are upgrading to high powered springs or hi-speed/torque motors opt for steel gears. If you want high ROF you can buy high speed gears from Prometheus, Systema and Guarder. Systema , Guarder and Prometheus make high torque as well. Most of these are helical which means the teeth are at a angle. If you use these you need a half toothed piston. They are also harder to shim correctly. You have 3 gears, the sector, bevel and spur gears.
Bushings -- The bushes keep the gears in places and are what the gears rotate on. If they break the gears will probably strip. The bigger the bushing the better. Most guns ship with plastic 6mm bushes fitted. If you upgrade go for metal bushes and if you are looking for higher ROF or torque, get a new gearbox casing that will 7mm or 8mm bushes.
Shims -- The shims are used to keep the gears aligned and correctly meshing. Incorrect shiming will lead to increased gear wear or failure.
|
|
|
|
Post by boybikil on Oct 12, 2008 7:42:11 GMT 8
ah... mao bah... payter... Thanks sa idea mga bossing...=)
|
|
|
|
Post by sherc on Oct 15, 2008 7:33:26 GMT 8
tsk... murag i have to learn pa aning mga ideas ninyo mga bosing dah. anyway this is a very nice sports.
|
|
